5 Tips for Painting a Motorcycle Correctly

Painting a vehicle serves to keep its appearance beautiful and charming like new, and the paint layer can protect the vehicle's body.

In addition to going to the nearest workshop, you can do it yourself by following the tips on how to paint a motorcycle yourself below.

1. Prepare the Necessary Tools and Materials

Preparing all the materials and tools needed for the painting process is the main thing to do.

Some of the tools and materials needed consist of

paint
thinner
putty
epoxy
masking tape
fine sandpaper
compound

Once all the needs are met, make sure you choose a spacious place to carry out the painting process.

Since it is done alone without the help of an expert, you certainly need to consider the painting location so that the paint does not spill and spread to other places.

2. Wash the Parts to be Painted

Before starting the way to paint a motorcycle, you should sort and choose the motorcycle body parts that will be coated with new paint.

However, make sure there is no dust or dirt left after cleaning, as this can damage the quality of the paint job.

To prevent other motorcycle parts from getting paint, please protect them with plastic sheets or newspapers.

You also need to prepare a fan to help dry the vehicle parts thoroughly, while also avoiding inhaling paint fumes for too long. To ensure no dirt is left behind.

Prepare additional lighting as a solution. With sufficient lighting, it will help you see more clearly when the painting process is carried out.

3. Sand the Vehicle Parts

After all preparations have been made, it is now time to sand the vehicle parts as one of the steps to paint a motorcycle correctly.

Sanding should not be done carelessly, as you must ensure that the sanding results are even.

You can also spray water to ensure that the old paint has been completely removed.

4. Putty the Motorcycle Body

After removing the old paint, it is now time to apply a putty layer so that the surface of the vehicle part becomes smooth and even when painted.

The putty mixture should not be too runny or too clumpy, then repeat the application process repeatedly because the putty hardens very quickly.

5. Start Painting the Motorcycle Body Parts

Please clean and sand the vehicle parts that have been puttied again to make the surface smoother. After that, you can paint the vehicle parts with the desired color and design, and don't forget to apply a primer coat to protect it from rust.

You can also apply compound to make the vehicle look shiny like a new motorcycle. As a final step in the motorcycle painting process, it doesn't hurt to coat the vehicle parts with varnish that is claimed to effectively protect the paint from dirt and stubborn dust.

Some people believe that repainting a beloved vehicle is a common thing. You can even do it yourself at home by relying on creativity and a little patience in doing it.