6 Ways to Fill Dry Battery Water in Cars, It Turns Out to be Easy!

Does the water in your car have a decrease in volume but you don't have time to go to the workshop and refill the battery water? If this problem occurs, there is actually no need to worry because the way to refill dry battery water can be done by yourself at home.

However, make sure you do not delay refilling the battery and do not end up doing refill the car battery water with zuur water, okay! The battery is one of the vital components of the vehicle. The battery is an electrical component that plays a core role, allowing the car to be continuously started.

If the battery water is below the specified volume, there are risks that arise, such as not being able to start the engine.

How to Refill Dry Battery Water

Actually, refilling the battery water can be said to be easy. You just need to prepare some tools first, such as a medium-sized flat screwdriver, new battery water, and a 15mm wrench. Here are the steps for refilling.

1. Ensure the electrical system is safe

Before refilling the battery, first ensure that the electrical system is in a safe position. To ensure this, you can turn off the car engine and then remove the car key.

If you want to be even safer, disconnect the negative terminal of the battery using a 10mm wrench and loosen the battery terminal. Once everything is loosened, you can proceed to the next step.

2. Open the battery cell cover

After ensuring that all refilling can proceed safely, you can open the battery cell cover. This cell cover has 6 pieces. To open it, turn the battery cell cover counterclockwise.

3. Check the capacity

After the cell cover has been opened, you can directly check the volume of the battery water. The way to check it is easy; inside the battery tank, there is a water volume limit. If the water is below that limit, immediately add battery water.

4. Fill the water carefully

When pouring the battery water, make sure to pay attention carefully. If you want to add battery water, you only need to add battery water from a blue bottle. Then, open the cap of the new water bottle.

Pour the battery water through the cell cover hole. When refilling the water, make sure the water is at the water volume limit. The way to fill dry battery water does not stop here. After finishing pouring, make sure to clean around the battery hole.

Cleaning around the battery hole is done to minimize water from contacting other components and causing corrosion.

5. Close the battery cell

If the refilling is complete, you can immediately close the battery cell again. One thing to pay attention to is that you must close it tightly and correctly, so that the water does not spill while driving.

6. Start the engine immediately

Then, let it sit for about 3 to 5 minutes. Then try to start the car engine. If the car engine has started, let it stay on as if you are warming up the car for about 10 to 15 minutes. This method is done to recharge the electrical power. The process of refilling battery water is complete.

Refilling dry battery water is very easy, isn't it? One thing to pay attention to when refilling car battery water is to be careful while doing it. In addition to monitoring the battery water level, make sure to pay attention to the maintenance of other car components.

Of course, for this periodic maintenance, it cannot be done alone. You can take the car to a Daihatsu authorized workshop. There, the car will be serviced by professional technicians. You also do not need to wait in long lines, as you can book a service online before heading out. So, what are you waiting for?

Tips Sahabat