8 Ways to Change a Car Tire by Yourself Correctly
When a car tire is flat or punctured in the middle of the road and requires a tire change. Meanwhile, there is no one to help. Whether you like it or not, you have to be able to change the tire by yourself. Follow the steps to change a car tire on your own correctly below.
Steps to Change a Car Tire by Yourself
Changing a car tire by yourself is actually not difficult. You just need to have the skill to change a car tire, have the necessary tools, and know the technique of turning bolts as well as the technique of changing the tire itself.
Fortunately, you can learn everything quickly through the following article review from us, Daihatsu.
1. Pull Over the Car and Give a Warning Sign
The first solution you should do when there is an incident is to pull over the car and give a warning sign. The urgency is so that other drivers know that your car is broken down and needs repair.
2. Prepare the Necessary Tools
After pulling over, turn off the engine. Take the tools needed to change the car tire, such as a car jack, a wheel wrench, and a spare tire. These tools are usually provided when you first buy the car.
3. Loosen the Tire Bolts Using a Wheel Wrench
If there is a cover for the tire bolts, remove it first using a screwdriver. Then, use the wheel wrench to turn the tire bolts counterclockwise. To speed up the process, you can loosen the bolts that are opposite each other. However, at this step, do not remove the tire bolts completely. You only need to loosen the tire bolts.
4. Lift the Car Using the Jack
Make sure you place the jack correctly.
- First, place the jack near the tire that will be changed.
- Second, ensure you place the jack on a strong structure. The best point to place the jack is at the jack point marked with a notch near the wheel.
- Third, after finding the best position, make sure the jack is upright, not tilted.
- Fourth, lift the tire using the jack until the car tire is elevated.
5. Remove the Flat Tire Bolts
When the car is lifted, remove the tire bolts completely until they are loose. Keep the removed bolts so they do not get lost. Also, lay the tire down to prevent it from rolling on the road.
6. Install the Spare Tire
Insert the spare tire slowly while slightly shaking it. After the tire is installed, insert the bolts in an opposite manner as when you loosened the bolts. You only need to install the bolts without tightening them first.
7. Lower the Jack and Tighten the Tire Bolts
Slowly lower the jack until the tire touches the ground. Once done, remove the jack and tighten the tire bolts one by one. Kick the tire with your foot to test whether the tire is properly installed securely or not. If it is, there will be no movement when your foot kicks the tire.
8. Store the Damaged Tire and Tire Changing Tools
After everything is done, clean up immediately. Store the damaged tire in the trunk. The same goes for the tire changing tools.
Those are the steps to change a car tire by yourself that you can practice without needing a mechanic's help. At the very least, you should know the basic knowledge as we have reviewed in this article.
Make sure you use a Daihatsu car. Because Daihatsu cars have a large trunk that is very useful for storing tools as well as a spare tire. So, if an incident occurs, you won't have to be confused about how to fix it by yourself.
