This is the Regulation of Car Window Film for Pick Up According to Ministerial Regulation

Understanding the rules of window film for pickup trucks before replacing the window film is very important. Because if the installation is not done according to the applicable rules, it can endanger the driver and result in a fine. To avoid this, let’s pay attention to the complete rules below.

Window Film Installation Rules for Pickup Trucks According to Ministerial Regulations

In general, window film is usually dark in color to protect the cabin of the car from being seen from the outside and to block sunlight. The installation of window film cannot be done carelessly, as there are rules governing the level of darkness of the window film.

Installing window film that exceeds the darkness limit can reduce the driver's vision, leading to accidents. Additionally, improper installation of window film can result in fines.

Therefore, the installation of window film on pickup trucks must comply with the ministerial regulations outlined in the Minister of Transportation Decree Number KM.439/U/Phb-76. The complete rules are as follows.

1. The installed window film must meet the required specifications

For motor vehicles equipped with front, rear, or side windows. The glass used must meet the following requirements.

The glass must be made from materials that are not easily breakable.
The glass must not be two-way transparent.
It must not alter the glass in a way that distorts the shape of people or objects seen through the glass.

Technically, the installation of window film must also meet the requirements set forth in Government Regulation Number 55 of 2012. The requirements are as follows.

The glass used must be scratch-resistant.
The glass used must be clear and not easily fade.
The glass used must not pose a danger if broken.
The glass used must not obstruct the driver's vision (line of sight).

2. The window film used must allow 70% light transmission

The window film (film coating) installed on pickup trucks must have a minimum light transmission of 70%. However, for the front and rear windows, materials that allow a minimum of 40% light transmission may be used. This light transmission must hit the upper side of the glass and not exceed one-third of the height of the glass.

3. The window film used must not cause reflections

The window film on pickup trucks is recommended to be made from materials that do not create new light reflections. The reflections allowed are those similar to those produced by clear glass.

4. It is prohibited to place or stick anything on the window film

Pickup truck owners are prohibited from placing any objects or sticking anything on the window film. For example, sticking stickers. If you are required to stick a sticker for government purposes, it is advisable that the sticker does not obstruct the line of sight while driving the vehicle. This applies to the front, rear, or side windows.

Thus, the rules for installing window film according to ministerial regulations that you need to know. If you intend to install film, it is best to consult with an expert mechanic first. By consulting, you can adjust your budget, the quality of the glass, and the visibility of the glass according to legal regulations.

If you are looking for the best workshop to install window film on your pickup truck, you can use the services of the nearest official Daihatsu workshop. Because Daihatsu workshops are the best in Indonesia, with expert mechanics, adequate service equipment, quality spare parts, fast and friendly service, and affordable prices.