How to Balance Car Tires and Cost Information
Car owners should understand how to properly balance car tires. By doing so, the wear and tear of the tires and the car's suspension will last longer. In addition, the car's wheels become more aligned and the steering becomes more stable. This can enhance driving comfort, reduce squeaking noises when turning, and save fuel consumption. Below, the complete method of balancing will be explained along with information on balancing costs if done at a workshop.
How to Properly Balance Car Tires
There are several correct ways to balance car tires that you need to know. The complete methods are as follows.
1. Preparation Stage
Before you balance the car tires on your own, you should first prepare the necessary tools such as a jack, balancer or weights, a wheel wrench, and a wheel balancer.
2. Jack Up the Car
After you have prepared all the tools for balancing, next jack up your car to remove the tire.
3. Remove All Nuts on the Tire
Next, you need to loosen all the nuts attached to the tire slowly.
4. Clean the Rim
The next step is to clean the entire rim of the car. You can use a brush and rim cleaning solution to remove all dust and dirt stuck to the rim.
5. Using a Wheel Balancer
For those who do not understand what a wheel balancer is, this tool is a device for balancing car wheels.
Generally, this tool has three sides, namely the right side, middle, and left side. The right side functions to determine the diameter of the rim. The middle side functions to determine the width of the rim. While the left side functions to determine the distance of the wheel from the machine.
After you understand the parts of the wheel balancer, you need to understand how to use it. The steps are as follows.
- Look at the measurement number displayed on the left side of the wheel balancer, then adjust the measurement number according to the standard measurement for balancing car tires. To adjust it, just press the (a+) or (a-) button.
- Next, press the (b+) or (b-) button to adjust the diameter and width of the rim. Make sure the results match the standard for balancing car tires.
- Finally, press the (c+) or (c-) button on the right side of the wheel balancer to adjust the diameter of the car.
6. Adding Weights
After the width and diameter of the rim have been adjusted to the standard for balancing car tires, you can attach weights to the car tire to lock in the adjustments and ensure the balancing results do not change.
7. Re-testing the Balancing Results
Once the tire balancing calibration process is complete, you can test the results to see if they are correct or not.
The method is quite simple, you spin the car wheel, then observe the straight line indicator displayed on the car wheel. Usually, a wheel that has been balanced will show pressure on the wheel balancer machine.
If it is balanced, you can proceed to the last step. However, if it is still unbalanced, you can repeat the steps like numbers 5 and 6.
8. Reinstall the Tire
If the result is balanced, you can remove the wheel balancer machine, then reinstall the tire that you have balanced back to its original position.
Read Also: The Difference Between Wheel Alignment and Balancing and Their Maintenance Costs
Information on Car Tire Balancing Costs
If you cannot balance car tires on your own, you can visit a car balancing expert workshop such as an official Daihatsu workshop. The cost ranges from Rp10,000 to Rp25,000 per wheel.
Thus, the review regarding how to balance car tires and its costs. Hopefully, the above review is useful.
