Causes of Total Car Electrical Failure and Their Solutions

The total electrical failure of a car is one of the common problems experienced by vehicles. One of the signs of a total electrical failure is the sudden loss of power when its electronic devices are turned on.
There are several factors that cause this problem. Don't worry if you don't know what those factors are. Because we will inform you through this article.
The causes are as follows!
Damaged Car Battery
The first cause of total electrical failure in a car is damage to the car battery. Battery damage does not happen just like that. There are certainly several factors that cause it.
A damaged battery is usually caused by the aging of the battery or parts of the battery starting to rust. The car battery itself is the most important element in the car's electrical system. If this element is damaged, then the car's electrical system will fail completely.
Alternator That Cannot Send Electrical Current
In addition to the battery, there is another important element in the car's electrical system, which is the alternator. The alternator is a device that can convert mechanical energy into alternating electrical current.
This electrical current will then be distributed to other parts of the car. If this function cannot be performed by the alternator, then the car's electrical system and its components will fail completely.
Broken Car Wires
Wires are another important element in the car's electrical system. Through the wires, electrical energy from the battery will be distributed to other components of the car. However, if the car wires are broken, then the car's electrical system will automatically fail completely.
Broken car wires can be caused by a break on their own or due to a short circuit. Among these two causes, a short circuit is the most troublesome reason for broken car wires.
Solutions to the Causes of Total Electrical Failure in Cars
Where there is a problem, there is also a solution. The same goes for total electrical failure in cars. All the causes of total electrical failure can be effectively addressed. As long as we know what the solutions are.
Fortunately, we have solutions for those causes. Don't believe it? Just check out the explanation below!
Performing a Jumper
The first solution you can do is to perform a jumper. This solution is done to address total electrical failure caused by a dead car battery.
By performing a jumper, the previously dead battery can be triggered to come back to life. Although not for long. However, if the battery does not come back to life after being jumped several times, then you can replace it with a new one.
Replacing the Problematic Alternator with a New Alternator
This is clearly a solution for an alternator that cannot send electrical current. Many may suggest you repair the old alternator, even though it has problems and causes total electrical failure in the car.
However, we do not recommend that. We strongly suggest that you replace the alternator with a new one. Insisting on repairing and using the old alternator will only repeat the same problem.
Using a Volt Stabilizer
This last solution is used for problems with broken wires due to short circuits. A volt stabilizer can protect the car and its wires from short circuits. Not only that, a volt stabilizer can also make the car more fuel-efficient.
Total electrical failure in a car is one of the common problems experienced by vehicles. One of the signs of total electrical failure is the sudden loss of power when its electronic devices are turned on.
There are several factors that cause this problem. All those causes have been mentioned above, along with their solutions. Hopefully, this can help!
Author: Anggie Warsito