Fix Dented and Rusty Car Body, Check Out 5 Proper Car Filler Methods

Buying a used car is often an option for many people. This is because purchasing a used car is considered more practical and tends to be cheaper. However, there are some drawbacks to buying a used car.

One of them is the car body that starts to rust or dent. To address this, check out the following car putty methods to restore its appearance.

1. Sanding

The first step before applying car putty is sanding. This step is taken to ensure that the car body is free from dirt.

If there are still parts of the car body that are rusty, you need to clean them until smooth. The puttying process will not be optimal if there are still uneven areas.

Check specific areas that are prone to friction. Prolonged use of the car can cause the body to peel off due to exposure to sunlight and rain.

If you find dents in certain areas, you can treat them using a special hammer before sanding.

2. Prepare Primer or Base Coat

After sanding and fixing uneven surfaces, you need to prepare primer or base coat first. Prepare the base coat and thinner as the first method of applying car putty. For your information, the ideal mixing ratio of base coat and thinner is 1:1.

This mixture of primer and thinner will later be used to paint the areas that will be puttied. Therefore, make sure to choose a quality base coat so that it adheres perfectly later.

Remember, apply the primer only on the areas that will be puttied. Avoid applying paint on areas that are still good to prevent peeling.

3. Prepare Putty and Polish

After preparing the primer and applying the paint, you now need to prepare the putty that will be used. Make sure you prepare the putty according to your needs. One thing you need to pay attention to is leveling the putty using a scraper.

At this stage, you must be wise and meticulous in applying the putty. Apply the putty to the car body using the scraper in thin layers; this method of applying car putty is to avoid textured areas.

Once the puttying process is complete, it's time to wait for the putty and polish to dry.

4. Resanding

If the putty is completely dry, the next step you need to take is resanding. Smooth out the areas that have been sanded until they are truly smooth.

At this stage, you can shape the car body parts according to your desire. Make sure that the car body surface is completely smooth without any rough texture.

5. Repeat the Puttying Process

If you feel that the car surface is truly smooth, the next step is to repeat the puttying. You need to know that the first puttying process will certainly leave some uneven areas.

Therefore, a second puttying is necessary. Please repeat the puttying and wait until it dries as the final method of applying car putty.

In addition to paying attention to the puttying process as explained in the review, you should also pay attention to the mixing of hardener and putty according to standards.