Without Hassle! Here’s How to Install Car Tape Directly to the Battery
The head unit or tape is one of the devices in a car to enhance driving comfort. This device will work if properly connected to the car's battery. However, some people are still not familiar with this. Instead of being curious, let's take a look at how to connect a car tape directly to the battery!
Understanding What a Car Tape Is
Before discussing how to install it, it's good to understand what a car tape is. This device can support the comfort of the driver and passengers when driving a four-wheeled vehicle.
A car tape or head unit will be a device that makes the journey feel less monotonous with the features embedded in it.
Why is that? The head unit has an audio source device that produces sound in car audio installations. There are many features within it, such as sound quality control, audio bass control, and other combinations.
In addition, this device also has various types from the Hi-end, Low-end, and Mid-end classes.
The higher the quality, the more complete the features it brings. Of course, the way to connect a car tape directly to the battery is also increasingly complex due to the components inside it.
But generally, the audio devices in a four-wheeled vehicle consist of a sound source, a sound producer or what is known as a loudspeaker, and an amplifier.
Read Also: How to Increase the Wattage of a Car Amplifier for Better Audio Quality
Tips for Installing a Head Unit
For those of you who have a new four-wheeled vehicle, it usually comes with a standard type head unit or tape. Simply put, the features embedded in that tape consist of an amplifier, loudspeaker, and the head unit itself.
In addition, there are also sound quality controls with three types of sound flow: SQ sound, SQL sound, and SPL sound for a combination of SQ and SQL.
However, for those of you who want to upgrade the tape in your car, you can replace it with more advanced features. Additionally, this device must be connected to the battery to function properly.
For those of you who have the skills to install this device, you can easily practice how to connect a car tape directly to the battery.
First, you need to prepare the device you want to install. Then, prepare the tools to support the installation of the car tape. Tools that can make it easier for you later include an avometer, screwdriver, insulation tape, insulok, and wire cutters.
Read also: 4 Important Things to Consider for Cool Car Audio!
Once ready, the next step is to open your four-wheeled vehicle's dashboard. First, remove the screws on the dashboard, then take out the original head unit from your car.
Then cut all the wires one by one to avoid short circuits. Here you will be faced with several wires of different colors. So you must be careful. The red wire is for the ignition, the yellow is for direct current, and the black is for ground mass body.
To replace it with a new unit, you can trace the ACC and Backup currents using the Avometer. Then connect the wires according to their inputs and connect to the voltage first.
The way to connect a car tape directly to the battery must be insulated with tape to prevent short circuits. Then turn on all the speakers to test if the installation was successful.
That’s some information about installing a head unit in a four-wheeled vehicle. The method is very easy because you only need to prepare a few tools, such as a screwdriver, avometer, insulation tape, wire cutters, and insulok.
Once done, you just need to connect according to the wire colors and test it using current to ensure success.