The Reason to Replace Shock Absorbers Must Be in Pairs
The shock absorber is a cylindrical component in a car that functions to absorb shocks created by the spring to prevent rolling effects. So, when the car passes over a bump, the spring will compress upwards, causing the car to be thrown upwards. Subsequently, the car body will automatically lower due to the presence of elastic springs.
However, if the car frequently traverses rough terrain or potholes, the shock absorber may often suffer damage. In fact, if the weight the car usually carries exceeds the limit, the shock absorber can also easily break.
Reasons Why Shock Absorbers Should Be Replaced in Pairs
So, should damaged shock absorbers be replaced in pairs? Here are the reasons!
1. Maintaining the balance of shock absorber performance
For replacing damaged shock absorbers, both must be replaced or in pairs even if one of them is not damaged. Why is that?
Of course, this is to maintain the balance of shock absorber performance in the car itself so that it continues to work optimally.
Usually, the imbalance in shock absorber performance between the left and right is caused by the condition of the shock absorber oil, which is no longer good. As a result, the swing of the left and right tires is not the same because the damping capacity of the shock absorbers is also not the same.
A new shock absorber will not swing as much as a used one because the viscosity or thickness of the oil is still good.
2. Maintaining the stability of the car
The next reason that requires you to replace both shock absorbers of your car at once is to maintain the stability of your vehicle.
If you only replace one damaged shock absorber, the stability of your car could be compromised. In fact, every driver needs good stability while driving to remain safe and comfortable.
Even when the car is at high speeds, stability is certainly very much needed. If the right and left shock absorbers are not stable, the movement of the car will also be more dangerous or could even lead to accidents.
3. Maximizing its function as a shock absorber
Common damage that occurs to car shock absorbers is the wear of the shock absorber bushing rubber, which is indicated by oil seeping out from the shock absorber. This is marked by the entire surface of the lower shock absorber rod being wet with oil.
If this happens to one shock absorber, you still need to replace both. The goal is to maximize the function of the shock absorber itself as a shock absorber. This way, the damping function can work more effectively and continue to provide comfort for both passengers and the driver.
Easy Tips for Maintaining Car Shock Absorbers
After you understand the importance of the role of shock absorbers in your car for comfort and safety while driving, you need to pay attention to the health of this part periodically.
Therefore, here are some easy tips for maintaining car shock absorbers:
1. Remove dirt that sticks
Since they are located under the car, shock absorbers can easily get dirty, especially during the rainy season. You probably often find fine sand or other dirt sticking to this component, right?
Sand or dirt that sticks to the shock absorber is feared to scratch the shock absorber shaft of your car. If left unchecked, over time the walls of the shock absorber can wear down and erode, causing leaks in the shock absorber.
To avoid this problem, it is important for you to regularly clean the car's undercarriage, especially after passing through roads in rainy conditions.
You can clean it with clean water and soap for optimal results.
2. Check the shock absorber protective rubber periodically
The next tip is to regularly check the protective rubber on your car's shock absorbers.
When dirt enters the shock absorber, it is certainly related to its protective rubber. Therefore, you need to perform periodic checks to keep it clean and free from dirt.
If the protective rubber of the shock absorber is not well maintained, it will easily get damaged and can allow dirt to easily enter the walls of the shock absorber, thus disrupting its performance.
3. Limit the load of the car
Next is to limit the load on your car. This may seem trivial, but if your car exceeds its load capacity, it will certainly put a heavy burden on your car's shock absorbers.
If forced, the shock absorber may leak or even fail. Therefore, always adjust the load of the car according to its capacity.
If damage occurs, you should immediately replace both shock absorbers of your car according to the standards and recommendations of the manufacturer.
For you Daihatsu car owners, you don't need to worry about getting original spare parts recommended by the manufacturer because Daihatsu workshops are available to provide the best service for your vehicle.
Get various spare parts for your car Daihatsu with an official guarantee. What are you waiting for? Immediately perform periodic service on your beloved Daihatsu car only at the nearest Daihatsu workshop in your city!
