How to Fix a Completely Dead Car Tape, Let's Identify the Causes!

The tape can be considered a companion that drives away fatigue for drivers when traveling. With the tape, you can play your favorite songs or videos, making the journey enjoyable. However, sometimes, the car tape can suddenly stop working completely when you want to use it. So how do you properly fix a completely dead car tape? What are the causes of this condition? For more details, please pay attention to the following review.

How to Fix a Completely Dead Car Tape

Here are some ways to fix a completely dead car tape that you can practice, including:

1. Check the fuse

The first way to fix a completely dead car tape is to check the fuse first. When your car tape is completely dead, you can check the fuse with a multimeter to check the power.

If there is no electrical power, it could be that the electrical wire around the melted fuse has broken. Or it could be that the fuse is starting to wear out. To get your car tape working again as before, you can replace the damaged or worn fuse with a new one.

2. Check the power on the head unit

If the fuse condition in the tape area is still good, but the tape is still completely dead. You need to check the power on the head unit with a multimeter. If there is no power in the head unit, there may be damage to the head unit cable. Or you can also perform a reset of the car head unit first.

3. Check the ground on the head unit

When the car tape is completely dead, you also need to check the ground on the head unit. If the ground condition is rusty and has no electrical power, it is likely that part is damaged. If this condition occurs, immediately replace the damaged ground with a new one.

4. Perform a bench test on the head unit

The next way to fix a completely dead car tape is to perform a test on the head unit and a bench test. If the ground condition on the head unit is still good and has electrical power when tested with a multimeter.

This indicates that your car tape is damaged and needs to be replaced with a new tape. To ensure this, you need to perform a bench test. It's easy, you can connect the ground with a 12 Volt power cable to confirm the tape's damage.

5. Visit a professional workshop

If you have tried several methods above but there is still no improvement, you can also visit a professional workshop to get the right service.

Causes of a Completely Dead Car Tape

Here are some things that can cause a completely dead car tape.

1. Dirty car tape

The accumulation of dust and dirt on the tape can affect the sound quality of the tape. If the dust and dirt are not cleaned immediately, it can cause the car tape to stop working completely.

2. Errors in the installation system

If you have modified the audio or speaker parts of the car, it could be that the modification process is the cause of the car tape being completely dead. This can happen due to incorrect wiring of the electrical cables or other components that do not fit, thus damaging the tape.

3. Improper usage

Frequently turning off or on the audio improperly or forcibly can damage the components inside the tape. This condition can cause the car tape to stop working completely.

4. Problematic or worn tape components

Issues or wear on several tape components, such as cables, fuses, tuners, and speakers can also cause the car tape to stop working completely.

Thus concludes the discussion on how to fix a completely dead car tape and some of its causes. To keep your car tape durable, you need to use these components wisely. Don't forget to regularly check and maintain these components.

Tips Sahabat

How to Fix a Completely Dead Car Tape, Let's Identify the Causes!