How to Install & Replace Car Wipers, Without Any Tools!

The wiper is one of the most relied upon components of a car when the rainy season arrives. If this component is damaged, you must replace it. So, how do you properly install a car wiper?

If we previously discussed how to turn off the car wiper, next we will provide a simple step-by-step guide to replacing the car wiper. You can follow the guide below.

How to Properly Install a Car Wiper

We often encounter problems with wipers such as wiper fluid not coming out. This can be caused by old and worn wipers.

Therefore, we must immediately replace the car windshield wiper with a new one. To ensure the car wiper is installed correctly, here are the steps to install or replace the car wiper:

Before installing the car windshield wiper, first ensure that the length of the wiper is suitable for the car. This is because each car has different sizes.
Remove the old wiper. To remove it, you can press and then push it down to detach the wiper assembly from the mount.
Install the new wiper. The installation only needs to be done from below and push until you hear a click. When installing, pay attention to the hook of the wiper assembly and the mount.
Also ensure that the connection between the assembly and the wiper mount is secure.

Basically, the way to install a car windshield wiper is very easy, as you only need to hook it until it fits, and this installation does not require any tools or keys. After the installation is successful, you can immediately try to operate it.

Tips for Maintaining Car Wiper Glass

Here are steps you can take to maintain and care for your car wipers to function well, including:

1. Check Wiper Rubber Regularly

The wiper consists of a blade and rubber. The metal frame is used as a support, while the rubber is used to repel and wipe away rainwater. The rubber part is one of the components that must be well-maintained.

If the condition of the rubber is not maintained, it will easily become damaged and its function will become suboptimal. For maintenance, you only need to pay attention to where you park the car. Avoid parking in hot locations.

High temperatures from sunlight will be absorbed by the glass and affect the wiper. Over time, the rubber will crack. To prevent heat from the glass, you can lift and prop up the wiper.

2. Maintain the Wiper Shaft

In addition to the wiper rubber, another part that needs attention is the shaft. The shaft plays a crucial role in maintaining the movement of the wiper when driving in the rainy season.

To keep the wiper's performance optimal, don't forget to lubricate it regularly. Lubrication can prevent the shaft from wearing out and keep its rotation smooth during the rainy season.

3. Be Careful When Washing Your Car

When washing your car, you must do it carefully. Clean and wipe the wiper part gently. This is because the rubber surface has a special liquid used as a protector and moisturizer.

Be careful not to use a cloth that removes this liquid, making the wiper difficult to move.

4. Rinse Wipers with Clean Water

Wiper maintenance can also be done by rinsing it with clean water. Avoid using vehicle washing soap. You can rinse the wiper with clean water and let it dry on its own.

Additionally, avoid using a cloth to dry the wiper. Using a cloth risks removing the special liquid it has.

How about that? Installing a car wiper and its maintenance is indeed very easy, right? Besides choosing the best wiper, always ensure to maintain the car's performance well. One way is to perform regular component maintenance at a workshop or Daihatsu official dealer.

With experienced technicians, fast and friendly service, all your car problems will be resolved well.

If you don't have much time for regular service? If you don't have much time, you can book a service in advance and come according to the queue schedule.