How to Install a Loose Car Bumper Clip to Make it Tight
Loose car bumper is a problem that cannot be taken lightly. As is known, the bumper is a component that serves to protect the front and rear parts of the car when impacted. In addition, this component can optimize the function of the suspension system. Considering its various functions, you should know how to install the loose car bumper clips so that they fit tightly again. So how do you do it? For more details, pay attention to the following review.
How to Properly Install Loose Car Bumper Clips
When you want to fix the loose car bumper clips, you need to pay attention to the following steps so that the bumper clips fit tightly again. Here are the complete steps to install the car bumper clips.
1. Measure the car bumper first
The first step is to measure how far the gap is between the bumper and the car body. This is necessary so that you can know how severe the condition of your car bumper is. This way, you can be much more careful when taking the next action.
2. Remove the car bumper
The next step in installing the car bumper clips is to remove the loose car bumper. The method is quite easy, use a screwdriver to open the screws located at the top or bottom of the bumper. Once done, disconnect all cables attached to the bumper body. If there is a grill on the bumper, you need to remove this part until the bumper can be separated.
3. Reset the screw holes and body mounts
The next step is to reset the screw holes and mounts on the car body. If the screw holes and mounts on the car body are damaged or broken, you need to create replacements. The method is quite easy; you just need to attach fiber to the car bumper. Then let it sit for a while until the fiber hardens. Once done, you need to drill the part of the fiber that you have created.
4. Reinstall the car bumper
The last step is to reinstall the bumper that you removed. Install it carefully so that no elements are left uninstalled. If this process still does not yield results, you can replace the bumper bracket with a new component.
Causes of Loose Car Bumper Clips
After you know how to install loose car bumper clips, you need to understand what factors can cause this condition to occur. Here are the complete causes.
1. The car frequently passes through damaged roads
The first cause is due to the frequency of the car passing through damaged roads too often. As is known, damaged roads can cause excessive shocks. Although these shocks can be controlled by the suspension system, it is possible that these shocks can loosen the bumper clips.
2. The bumper is impacted
The second cause is due to the bumper being hit hard, for example, if your car collides or is collided with.
3. Age factor
The last cause is due to the age of use being too long.
Tips for Maintaining Bumpers for Longevity
To keep your bumper in good condition, you need to practice the following tips.
1. Avoid driving on damaged roads too often
The first tip is to avoid damaged roads when driving your car. Damaged roads certainly have uneven surfaces, which increases the shocks on the car. This condition can accelerate the wear of the bumper and the car's suspension system components. In addition to damaged roads, you should also avoid roads with many speed bumps.
2. Always check and perform routine maintenance
The second tip is to check the condition of the bumper before traveling. You need to ensure that the clips and screws are tightly installed. Avoid replacing the bumper too often.
If you are not skilled and confident in disassembling the bumper, it is best to take your car to the nearest Daihatsu workshop. The cost estimate depends on the level of damage you experience and the paint of the car you use. The cost of repairing the car bumper ranges from Rp500,000 to millions.
