Causes of Car Clutch Noise When Pressed Along with Solutions
The clutch is one of the important components of a car. This component can help prevent the engine from stalling during gear shifts in low-speed vehicles.
Like other car components, the clutch is also not free from problems. A clutch that makes noise when pressed is one of them. This problem often experienced by the clutch does not occur on its own.
Of course, there are several factors that cause it. In this article, we will inform you about the causes of this problem. We will also explain the solutions to these causes.
The causes of a clutch making noise when pressed and their solutions can be found below!
Damaged or Worn Release Bearing
The clutch has many components inside it. One of them is the release bearing. This bearing component serves as a link between the release fork and the rotating clutch unit.
This component is very susceptible to damage or wear. There are several factors that cause this. The age of the release bearing and poor material quality are two of them.
If this component is damaged or worn, it will produce noise in the clutch, especially when the clutch is pressed.
Main Solution to This Problem: replace the damaged or worn release bearing with a new one.
Worn Pressure Plate
In addition to the release bearing, the pressure plate is another component found in the clutch. This component is the thinnest among the others.
Due to its thinness, the pressure plate is prone to problems. One of the most common issues is wear. One characteristic of a worn pressure plate is that its shape starts to bend.
If this happens, there will be parts of the plate that touch the flywheel and pressure plate. If that happens, the clutch will produce a friction noise when pressed.
Main Solution to This Problem: like the previous cause, the best solution for this cause is also quite similar. You need to replace the worn pressure plate with a new one.
Dry Actuator Mechanism in the Clutch
The cause of a clutch making noise when pressed is commonly found in hydraulic model clutches. On one hand, hydraulic models can make the clutch function optimally. However, on the other hand, it can also lead to several problems.
One of them is the dryness of the actuator mechanism in the clutch, especially in the hinge part. If left unchecked, the clutch may start to make noise when pressed.
Main Solution to This Problem: To address this cause, you just need to spray lubricant on the dry hinge part.
Too Small Movement Gap on the Pressure Plate
This last cause usually occurs for two reasons. The clutch gap setting may be too wide, and the hydraulic system in the clutch may have air in it. The impact of this cause is the emergence of a slip-like sound when the clutch makes noise when pressed.
Main Solution to This Problem: The solution to this problem is quite complicated. There are several steps to resolve this cause. Those steps are:
Check the free play adjustment on the clutch. If it seems too wide, you can reduce that gap.
Check the brake fluid near the car's clutch. If the brake fluid is low, you can add more fluid. Don't forget to perform the bleeding process first before doing that.
Those are some causes of a clutch making noise when pressed, along with their solutions. We hope this can help you all.
Author: Anggie Warsito
