3 Ways to Turn Off the ABS Light that is On in a Car

Currently, the use of ABS (Anti-lock Brake System) technology is widespread. Almost all car manufacturers incorporate this technology feature into their vehicles to enhance safety.

The main function of ABS in cars is to prevent the braking system and wheels from locking up during sudden braking. Thus, you can still control the car well without skidding while braking.

When you use the ABS feature, the indicator light for this feature automatically turns on. So what if the ABS light stays on? How do you turn off the ABS light and the handbrake light that is always on in the car? For more details, pay attention to the following methods.

How to Turn Off the ABS Light That Is Constantly On

Here are some methods you need to know to address the ABS light that stays on continuously.

1. Check the Indicator Light Sensor

The first method, you can first check the ABS indicator light sensor. Check the sensor cable located at the front wheels of the car for any issues.

Next, check the function of the indicator light sensor that detects the condition of the brake pads that are starting to wear thin. This sensor condition causes the ABS indicator light to turn on because the brake fluid level drops drastically.

2. Clean the Throttle Body

The second method, you can clean the throttle body using a special car cleaner. Spray the liquid into the air intake hose located in the car's engine. After the cleaning process, the car engine may sputter for a moment until it returns to normal condition.

3. Visit an Authorized Workshop

If the ABS indicator light remains on, you can seek help from an authorized workshop to resolve the issue. You can visit the nearest Daihatsu dealer for maintenance of your beloved Daihatsu car.

How to Turn Off the Handbrake Light That Is Constantly On

Here are some methods you need to know to turn off the car's handbrake light that stays on, including:

1. Check the Brake Fluid Level

If the handbrake light stays on continuously, it could be that your brake fluid level is running low. You can add brake fluid until it exceeds the minimum requirement.

2. Replace the Brake Pads

Worn brake pads can cause a drastic decrease in the brake fluid level in the reservoir tank.

This can trigger the handbrake light to stay on continuously. To address this, you should immediately replace the worn brake pads with new ones.

Causes of the ABS and Handbrake Lights Staying On

Here are some factors that can cause the ABS and handbrake lights to stay on.

Causes of the ABS Light Staying On

Problematic control unit
Brake fluid volume is nearly empty
Problematic speed sensor
Interference in the engine system, especially in the wiring installation
Problematic solenoid
Standard bulb check
Malfunctioning pumping

Causes of the Handbrake Light Staying On

Brake fluid volume is nearly empty
Brake pads are thin or worn
Brake fluid leak
Forgot to release the parking brake or handbrake

Thus, a complete review of how to turn off the handbrake light and the ABS light that stays on. Make sure you always regularly check and maintain the components of the car's braking system.

This is mandatory, considering the crucial function of the braking system for the comfort and safety of car users.

Don't forget to visit the nearest workshop or Daihatsu dealer when you need maintenance and replacement of car components. Daihatsu will provide you with the best service in addressing your car problems.

Tips Sahabat