Do you know how to properly disassemble and assemble a car's cylinder head? Of course, for senior mechanics, disassembling and assembling the cylinder head can be done easily.

However, for beginners, this process cannot be done easily. Beginners must know the components of a car to be able to install the cylinder head correctly. 

It's understandable, cars do not only rely on the engine, but also have several supporting components inside. Now, we will explain in detail how to disassemble and assemble a car's cylinder head correctly. Curious? Let's take a look!

Car Cylinder Components

Before finding out how to properly disassemble and assemble a car's cylinder head, make sure to know the car's cylinder components first. Here are various car cylinder components, including:

1. Spark Plug
2. Gasket
3. Water Jacket
4. Valve Gauge
5. Valve Lifter
6. Intake Valve
7. Exhaust Valve
8. Adjusting Shim
9. Valve Seat
10. Oil Seal
11. Valve Keepers
12. Camshaft
13. Exhaust Manifold
14. Intake Manifold

How to Disassemble and Assemble a Car Cylinder Head

Here are the steps or ways to disassemble and assemble the car cylinder head, including:

1. Before disassembling, prepare tools such as aids and wrenches
2. Prepare a spacious area for more freedom of movement
3. Disconnect the car battery
4. Drain the engine oil until the oil pan is empty
5. Remove the air filter from the cylinder head
6. Remove the radiator and radiator fan
7. Remove the starter motor and its alternator
8. Remove the water pump
9. Next, if the car uses a turbo, remove the turbocharger oil pipe
10. Remove the fuel filter
11. Remove the injection lines
12. Remove the oil filter
13. Remove the springs and pull tensioner
14. Next, remove the corrosion resistor
15. Remove the thermostat
16. Remove the return pipe, then close the cylinder head by removing the bolts that circle the cylinder
17. Remove the spark plugs hanging on the diesel
18. Remove the rocker arm
19. Remove the cross head
20. Remove the injection holder
21. Remove the rocker arm housing
22. Remove the cylinder head bolts
23. Lift the cylinder head
24. Clean the cylinder head components. 

Read Also: Having High Durability, Here are 5 Main Functions of the Cylinder Head

How to Install the Cylinder Head

After successfully disassembling, you can clean all components, then check in detail which components need to be replaced. Every time you disassemble, make sure to check for exhaust valve leaks. 

In fact, to install the car's cylinder head, you just need to repeat the steps above. As a tip, make sure to separate components from one another, so that installation can be done more easily. 

For example, the oil filter and oil dipstick can be grouped together, and all the bolts can also be grouped. Then, the springs and pull tensioner can also be separated. This step is taken so that even if you do not know the components, you can still install all components correctly.